Grass-valley iTX Output Server 2 v.2.6 Manuel d'utilisateur télécharger pdf (Page 42)

Output Server 2 Channel Configuration

Configuring Dolby Metadata

7In the Check Digit field, enter the two-letter Nielsen check digit.

8In the Distribution Type field, select one of the following:

• Pro

gram Content

• F

inal Distributor

• Unknown Distribution

9Click S

ave to store your changes and automatically reboot the Output Server 2 service.

Alternatively, wait until you have finished making changes in other areas of the

Configuration panel, then click Save.

Configuring Dolby Metadata

Dolby metadata can be configured for Dolby E and Dolby D output groups using the Dolby

Metadata tab. During configuration, you can set specific values for each parameter and set

a resolution rule.

Setting the Rul

e field to Manual Value applies the set value as the constant default.

Setting the Rul

e field to Decoders, then manual value applies a conditional setting such

that if the Dolby decoder provides a setting for that metadata parameter, then the

decoder’s setting takes precedent over the set value.

To configure metadata for Dolby E and/or Dolby D output groups:

1 Open the Output Server 2 user interface for

the channel you want to configure, as

described in Accessing the Output Server 2 User Interface, on

page 31.

2Go to Co

nfiguration > Dolby Metadata tab.

The Dolby metadata configuration options appear.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 74 75

Pas de commentaire

Grass-valley iTX Output Server 2 v.2.6 Manuel d'utilisateur Page 42