34 8960DEC—Instruction Manual
Configuration
Timing Web Page
The Timing web page shown in Figure 15 appears when he optional
8900FSS Frame Sync submodule is installed on the 8960DEC module. If the
submodule is not installed, the web page will appear as shown in
Figure 16
on page 35.
The Timing web page provides lock source selection and fine phase adjust-
ments along with freeze controls for the input video. Refer to the Configu-
ration Summary in Table 4 on page 21 for a summary of what video lines
are affected by each control, all parameters, step sizes, and default values.
Use the Timing display to set the following parameters:
• Choose a Lock Source from
Reference input or Video In input.
• Adjust
H Phase in nanoseconds and V Phase adjustment in lines.
•Set
Freeze Recognition to Manual or Auto. Selecting Auto stores the last field
in the Frame Synchronizer to use if the input video is lost or corrupted.
• Set the
Freeze Mode to Frame or Field.
• Set the
Freeze Field to Field 1 or Field 2.
• Set the
Freeze Signal to Last Field or Black. This will determine the freeze
signal when a freeze is activated in either
Auto or Manual mode.
• To perform a manual freeze, click the
Freeze button at lower left.
Commentaires sur ces manuels