Grass-valley 8960DEC Manuel d'utilisateur télécharger pdf (Page 49)

8960DEC—Instruction Manual 49

Status Monitoring

In general, LED colors used on the frame and modules indicate:

• Green – normal operation, (Pass) or signal present, module locked.

• Red – On continuously = fault condition, flashing = configuration error.

• Yellow – On continuously = active condition (configuration mode or

communication), flashing in sequence = module locator function.

Status LEDs for this module are described in Operation Indicator LEDs on

page 16. LEDs for the 8900NET module are described in the 8900NET

Network Interface Instruction Manual.

Frame Alarm

A Frame Alarm connection is available on pins 8 and 9 of the RS-232 con-

nector on the rear of the 8900 frame (Frame Monitor or 8900NET Network

Interface module required). This will report any of the status items enabled

with the 8900NET or Frame Monitor module configuration DIP switch.

Connection and use of the Frame Alarm is covered in detail in the 8900NET

Network Interface Instruction Manual.

Web Browser Interface

When the 8900NET module is installed in the frame, a web browser GUI

can indicate frame and module status on the following web pages:

• Frame Status web page – reports overall frame and module status in

graphical and text formats.

• Module Status web page – shows specific input and reference signal

status to the module along with enabled options and module versions.

• A Status LED icon on each web page to report communication status for

the frame slot and acts as a link to the Status web page where warnings

and faults are displayed (8900NET version 3.0 or later).

In general, graphics and text colors used indicate the following:

• Green = Pass – signal or reference present, no problems detected.

• Red = Fault – fault condition.

• Yellow = Warning – signal is absent, has errors, or is mis-configured.

• Gray = Not monitored (older 8900 module).

• White = Not present.

Status reporting for the frame is enabled or disabled with the configuration

DIP switches on the 8900NET module. Some module status reporting items

can also be enabled or disabled on individual configuration web pages.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54

Pas de commentaire

Grass-valley 8960DEC Manuel d'utilisateur Page 49