Grass-valley 7600REF Manuel d'utilisateur télécharger pdf (Page 70)

70 7600 SD/HD/MHD-REF — Instruction Manual

Using a TFTP Server

The use of an TFTP server with the 7600REF models allows the customer to

upgrade software in the field, and, if necessary, generate a copy of the 7600

log file to send to Technical Support for troubleshooting purposes or option

enabling.

The 7600 log is a unique digital signature for each 7600 frame and describes

the options that have been enabled. As mentioned earlier, options come

already enabled from the factory so using this function to create a log file

for enabling options should not be required unless requested by Customer

Service.

However, software upgrades may be preformed in the field using the TFTP

server. See Updating 7600 Software on page 73.

To prepare a TFTP Server refer to Preparing a TFTP Server on page 71. The

suggested shareware application is called Solarwinds and can be down-

loaded from http://solarwinds.net/downloads if required.

Run the installing program, accepting all default options. Note that you

may require Administrative rights under Windows to install new applica-

tions.

Local Area Networks

In order to communicate with the TFTP server, the 7600REF must have a

valid IP Address in the same subnet (range) as the server.

• If communication is via a company network, then IP addresses may be

automatically allocated using DHCP.

• If the 7600REF is connected to a small network specifically established

for technical equipment, then static IP addresses may be in use and the

7600 should be configured accordingly.

• If the 7600REF is not currently connected to a LAN, Solarwinds may be

installed on a laptop which is then connected to the 7600REF with a

crossover cable.

The 7600REF Ethernet port is configured using the Setup menu, then navi-

gating to the Comms menu. Refer to Setup – Comms on page 50.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 83 84

Pas de commentaire

Grass-valley 7600REF Manuel d'utilisateur Page 70